Home esr Products Inquiry ToD Imprint Contact
Language: deutsch english
Metal film resistor

MiniMELF 0204

print version

Data sheet Download PDF
1,40x3,40 mm
TC, Resistance ranges and tolerances
TC ± 10
0,1%  100R-20K 
0,25%  10R-20K 
0,5%  10R-20K 
1%  10R-20K 
TC ± 15
0,1%  100R-100K 
0,25%  10R-100K 
0,5%  10R-100K 
1%  10R-100K 
TC ± 25
0,1%  100R-270K 
0,25%  10R-330K 
0,5%  4R7-560K 
1%  4R7-1M 
TC ± 50
0,1%  100R-270K 
0,25%  1R-330K 
0,5%  1R-1M 
1%  1R-10M 
TC ± 100
1%  0R1-0R91 
5%  0R1-0R91 
Ratings (CECC 40 101-806)
Limiting element voltage Umax  200 V 
Power edition Umax  300 V 
Rated dissipation Pmax  1/4W 
Power edition Pmax  1/2W 
Weight (100 pcs)  ca. 5 g 
Taping (IEC 286 part 3)
Tape width  12mm 
Step  4mm 
Pcs. per reel 180Ø  3000 
Specific Products
Please contact our sales team 
Test Conditions Requirements
MIL-STD-202F, Method 304 Temperature coefficient  +25/-55/+25/+125/+25°C  by Type 
JIS-C-5202-5.5 Short time overload  2.5 times RCWV or max. overload voltage for 5 sec.  ΔR ±0.1% 
MIL-STD-202F, Method 107G Thermal shock  100 cycles. -55°C to +150°C  ΔR ±0.1% 
MIL-STD-202F, Method 108A  Load Life  RCWV, 70°C, 1.5h on, 0.5h off, total 1000~1048h   ΔR ±0.25% 
MIL-STD-202F, Method 103F Humidity (steady state)  40°C, 90~95%, RCWV 1.5h on, 0.5h off, total 1000~1048h  ΔR ±0.25% 
JIS-C-5202-7.2 Resistance to Dry Heat  96h at 155°C without load  dr ±0.50% 
JIS-C-5202-7.1 Low temperature operation  1h at -65°C followed by 45min. of RCWV  ΔR ±0.25% 
MIL-STD-202F, Method 208H Solderability  245°C±5°C, 5±0.5sec  >95% min. coverage 
MIL-STD-202F, Method 210E Resistance to soldering heat  260±5°C, 10±1sec  ΔR ±0.1% 
 Comment  further specificationa  see data sheet 
Order example
Type  SMDM 0204 
Rated resistance  17K64 
Tolerance  0,1% 
TC  TK15