Home esr Products Inquiry ToD Imprint Contact
Language: deutsch english
Metal film resistor

BP 0207

print version

Inquiry
 
Data sheet Download PDF
 
Dimensions
2.5 x 6.5 mm
 
 
TC, Resistance ranges and tolerances
 
TC ± 3
0,05%  50R - 120K 
0,1%  30R - 200K 
0,25%  30R - 200K 
0,5%  30R - 200K 
1% 
 
TC ± 5
0,05%  50R - 250K 
0,1%  10R - 500K 
 
TC ± 10
0,05%  50R - 510K 
0,1%  50R - 1M 
0,25%  50R - 1M 
0,5%  50R - 1M 
1% 
 
TC ± 15
0,05%  50R - 510K 
0,1%  5R - 1M5 
0,25%  5R - 2M 
 
TC ± 25
0,05%  50R - 510K 
0,1%  5R - 3M 
0,25%  2R - 3M 
0,5%  2R - 5M 
1%  1R - 5M 
 
TC ± 50
0,05%  50R - 510K 
0,1%  5R - 3M 
0,25%  2R - 3M 
0,5%  2R - 5M 
1%  1R - 5M 
 
Ratings (CECC 40 101-806)
Thermal resistance  max. 140 K/W 
Limiting element voltage Umax  @300 V 
Rated dissipation Pmax  P70 (J0 = 125°C): 0,4 W
P40 (J0 = 125°C): 0,6 W 
Insulation voltage  >750 V 
Temperature range  TC≥(0±25x10-6): -25°C to 125°C
TC≤(0±15x10-6): -10°C to 85°C 
 
Characteristics
Climatic category  55 / 125 / 56 
Temperature rise at rated dissipation  Jr ≤ 55K 
Weight (100 pcs)  ca. 28 g 
 
Specific Products
Please contact our sales team 
 
Low inductiv "N"
TC 50 0,5%  2R - 1K 
TC 50 1,0%  1R - 1K2 
 
Tests
 
Test Conditions Requirements
4.13 Overload  5s, 2,5 x Urated or 2 x Umax  ΔR≤±(0,1%R+0,01Ω) 
4.17 Solderability  2s, 230°C  ≥95% with solder wetting 
4.16 Robustness of terminations  tensile, bending, torsion  ΔR≤±(0,1%R+0,01Ω) 
4.18 Soldering-Resistance to heat  260±5°C, 10s  ΔR≤±(0,1%R+0,01Ω) 
4.19 Rapid change of temperature  -65°C, 155°C, 5x  ΔR≤±(0,1%R+0,01Ω) 
4.23 Climatic sequence    ΔR≤±(0,5%R+0,05Ω) 
4.24 Damp heat, steady  40°C, 93% r.H., 56d  ΔR≤±(0,5%R+0,05Ω) 
4.25 Endurance at 70°C  Urated or Umax, 1000h
Urated or Umax, 8000h 
ΔR≤±(0,5%R+0,05Ω)
ΔR≤±(1%R+0,05Ω) 
Section numbers of test and performance requirements refer to EN 140 000. 
Test methods refer to IEC 68-2. See also CECC 40 101-806. 
The statements regarding the requirements are based on the stability class 0,5. 
Reference measurements are to be performed at 20°C (see EN 140 000). At low ohmic values the distance of the measuring clip has to be considered (24±2mm). Less than 1k-Ohm should always be measured with the 4-wires-method. 
 
Order example
Type  BP 0207 
Rated resistance  35K04 
Tolerance  0,05% 
TC  TK5 
 
Inquiry