Home esr Products Inquiry ToD Imprint Contact
Language: deutsch english
Thick film resistor

SMDV 0402-2512

print version

Inquiry
 
Data sheet Download PDF
 
Viking
 
Dimensions
Length  1.00±0.05 
Width  0.50±0.05 
Height  0.35±0.05 
I1  0.20±0.10 
I2  0.25±0.10 
 
Tolerances and Resistance ranges
 
Ratings
Power rating at 70°C  1/16 W 
Operation temp. range  -55°C ~ +125°C 
Max. working voltage  50 V 
Max. overload voltage  100 V 
Resistance range E24Tol.±1%, ±5%  1 Ω - 10 MΩ 
Resistance range E96Tol. ±1%  1 Ω - 10 MΩ 
TCR ± 100ppm/°C  10 Ω ≤ R ≤ 1 MΩ 
TCR ± 200ppm/°C  1 Ω ≤ R ≤ 10 MΩ 
 
Tests
 
Test Conditions Requirements
JIS C 5201-4.25, IEC 60115-1-4.2 Endurance at 70°C  70±2°C, Max working voltage for 1000h mit 1,5h ON and 0,5h OFF  1%: ±(2%+0,05Ω); 5%: ±(3%+0,05Ω); Jumper: <100mΩ 
JIS C 520-4.8, IEC 60115-1-4.8 Temperature coefficient  -55°C~+125°C, 20°C is the reference temperature  by Type 
JIS C 5201-4.13, IEC 60115-1-4.1 Short time overload  2.5 time RCWV / Ma. overload Voltage for 5 sec.  1%: ±(1%+0,05Ω); 5%: ±(2%+0,05Ω); Jumper: <50mΩ 
JIS C 5201-4.7, IEC 60115-1-4.7 Short time overload  1.42 times RCWV (RMS) for 1 min.  no breakdown or flashover 
JIS C 5201-4.18, IEC 60115-1-4.1 Resistance to soldering heat  260±5°C for 5 sec  1%: ±(1%+0,05Ω); 5%: ±(1%+0,05Ω); Jumper: <50mΩ 
JIS C 5201-4.33, IEC 60115-1-4.3 Substrate bending test  bending once for 5 sec. with 3mm, 2010 and 2515 with 2mm  1%: ±(1%+0,05Ω); 5%: ±(1%+0,05Ω); Jumper: <50mΩ 
JIS C 5201-4.17, IEC 60115-1-4.1 Solderability  245±5°C for 3 sec  > 95% coverage 
JIS C 52014.6, IEC 60115-1 4.6 Insulation resistance  Max. overload voltage fo 1 min.  ≥ 10GΩ 
JIS C 5201-4.23, IEC 60115-1-2.2 Endurance at 125°C  + 125°Cfor 1000h  1%: ±(1%+0,05Ω); 5%: ±(1,5%+0,05Ω); Jumper: <50mΩ 
JIS C 5201-4.19, IEC 60115-1-4.1 Rapid change of temperature  -55°C~+125°C, 5 cycles  1%: ±(0,5%+0,05Ω); 5%: ±(1%+0,05Ω); Jumper: <50mΩ 
JIS C 5201-4.24 Damp heat with load  40±2°C, 90~95% R.H., Max working voltage for 1000h mit 1,5h ON and 0,5h OFF  1%: ±(2%+0,05Ω); 5%: ±(3%+0,05Ω); Jumper: <100mΩ 
 
Order example
Type  SMDV 0402 
Rated resistance  1R 
Tolerance  5% 
TC  200 
 
Inquiry